WHAT'S NEW


Anchor-Seal, Inc.
54 Great Republic Drive

Gloucester MA 01930
800-669-5217

Product Overview

NEW! U2085AV - Water Clear - Platinum Mold Use Only
No TDI, MDA or MOCA, De-Mold in 6-8 Hours, UV & Weather Resistant
Product
(Color)		 Shore
Hardness
 Working
Time
(Min) 77F		 Demold Time
@77 Depending
On Mass		 Shrinkage
(in/in)		 Viscosity
@ 77F
CPS		 Mix Ratio
A:B By Wt
(By Volume)
anchorseal, inc.
U2085AV
(Water Clear)		 85A 20 minutes 6-8 hours 0.003 850 65 : 100
Urethane Elastomer / Casting Resin, UV and Weather Resistant, Flexible, Water Clear
anchorseal, inc.
NEW! USA 1530 - Specialty Urethane Sealant & Electrical Encapsulant
Sealant for Leaky Natural Gas Pipes, Gap filling, Potting, Encapsulation
Product
(Color)		 Shore
Hardness
 Working
Time
(Min) 77F		 Demold Time
@77 Depending
On Mass		 Shrinkage
(in/in)		 Viscosity
@ 77F
CPS		 Mix Ratio
A:B By Wt
(By Volume)
anchorseal, inc.
USA 1530
Transparent Green		 10-15A 26 minutes 40 minutes 0.003 250 26.6 : 100
Very Soft & Flexible, Easily Reentered for Repair
anchorseal, inc.
NOTES:
Pot life, gel time, cure time, and demold time vary depending on quantity mixed, thickness of casting and mold temperature. Use of heated molds accelerates curing. Low temperatures will slow the curing and extend demold time. Aliphatic Urethanes do not yellow in an outdoor environment. They do not affect the color fastness of the tints used in them. Read label, Technical Data and Material Safety Data Sheet before use.
 Anchor seal, inc., New Products