Anchor-seal, Inc.
anchor-seal  
Anchor-Seal, Inc.

Anchor-Seal Water Clear Aliphatic Polyurethane Elastomers
Flexible and rigid casting resins, pigmentable, non-yellowing, weather resistant, exceptional clarity and no odor

Product #

Color

Shore
Hardness
 Working Time
100 Grams
@77F		 Demold Time
@ 77F
Depending
On Mass		 SHRINKAGE
(in/in)		 Viscosity
@ 25C
CPS		 Mix Ratio
By Weight
(By Volume)

U1085AV*
Water Clear

 85A 10 minutes 6 - 8 hours 0.003 400 65 : 100
MSDS Sheets:   U1085AV - Pt A,   U1085AV - Pt B UV Stable, Flexible, Water Clear
Anchorseal

U1282DV*
Water Clear

 82D 12 - 15 minutes 6 - 12 hours 0.005 650 100 : 95
MSDS Sheets:   U1282DV - Pt A,   U1282DV - Pt B UV Stable, Water Clear, High Impact Strength, High HDT
Anchorseal

U2082DV*
Water Clear

 82D 20 minutes 16 - 24 hours 0.005 650 100 : 95
MSDS Sheets:   U2082DV - Pt A,   U2082DV - Pt B UV Stable, Water Clear, High Impact Strength, High HDT
Anchorseal

U3082DV*
Water Clear

 82D 30 minutes 24 hours 0.005 650 100 : 95
MSDS Sheets:   U3082DV - Pt A,   U3082DV - Pt B UV Stable, Water Clear, High Impact Strength, High HDT
Anchorseal

U6082DV*
Water Clear

 82D 60 minutes 24 - 30 hours 0.005 650 100 : 95
MSDS Sheets:   U6082DV - Pt A,   U6082DV - Pt B UV Stable, Water Clear, Thick Section Casting
Anchorseal

U12082DV*
Water Clear

 82D 120 minutes 48hrs (1" casting) 0.005 650 100 : 95
MSDS Sheets:   U12082DV - Pt A,   U12082DV - Pt B UV Stable, Water Clear, Large Castings
Anchorseal

* Platinum Mold Only

Pot life, gel time, cure time, and demold time vary depending on quantity mixed, thickness of casting and mold temperature. Use of heated molds accelerates curing. Low temperatures will slow the curing and extend demold time. Aliphatic urethanes do not yellow in an outdoor environment. They do not affect the color fastness of the tints used in them. Read label, Technical Data and Material Safety Data Sheet before use.