Anchor-seal, Inc.
anchor-seal  
Anchor-Seal, Inc.

Anchor-Seal Shore 'D' Rigid Polyurethane Elastomers
Housings, models, gears, medical, and Industrial enclosures, low odor, low viscosity

Product #

Color

Shore
Hardness
 Working Time
100 Grams
@77F		 Demold Time
@ 77F
Depending
On Mass		 SHRINKAGE
(in/in)		 Viscosity
@ 25C
CPS		 Mix Ratio
By Weight
(By Volume)

U370D
Opaque White

70D 3 minutes 10 minutes 0.005 100

100 : 86

(1 : 1)
MSDS Sheets:   U370D - Pt A,   U370D - Pt B Fast Demold, Low Visc, Virtually Buuble Free, Vacuum Degassing not Necessary
Anchorseal

U380D *
Transparent

 80D 3 minutes 30 minutes 0.005 400 95 : 100
MSDS Sheets:   U380D - Pt A,   U380D - Pt B High Impact Strength, Low Odor, Easily Tinted
Anchorseal

U1080D *
Transparent

 80D` 10 minutes 4 hours 0.005 400 95 : 100
MSDS Sheets:   U1080D - Pt A,   U1080D - Pt B High Impact Strength, Low Odor, Easily Tinted
Anchorseal

U2080D *
Transparent

 80D 20 minutes 12 - 16 hours 0.005 400 95 : 100
MSDS Sheets:   U2080D - Pt A,   U2080D - Pt B High Impact Strength, Low Odor, Easily Tinted
Anchorseal

U3080D *
Transparent

 80D 30 minutes 16 hours 0.005 400 95 : 100
MSDS Sheets:   U3080D - Pt A,   U3080D - Pt B High Impact Strength, Low Odor, Easily Tinted
Anchorseal

U180DFR
Opaque

 80D 1 minutes 4 minutes 0.004 200

100 : 83

(1 : 1)
MSDS Sheets:   U180DFR - Pt A,   U180DFR - Pt B Very High Impact Strength, UL94V-O, Dual Syringe or Machine Cast
Anchorseal
* Also available in white - if specifying white add a ʻWʼ at the end of product code.

Pot life, gel time, cure time, and demold time vary depending on quantity mixed, thickness of casting and mold temperature. Use of heated molds accelerates curing. Low temperatures will slow the curing and extend demold time. Read label, Technical Data and Material Safety Data Sheet before use.